| Paketname | digitemp |
| Beschreibung | read temperature sensors in a 1-Wire net |
| Archiv/Repository | Offizielles Debian Archiv squeeze (main) |
| Version | 3.5.0ds1-1 |
| Sektion | electronics |
| Priorität | optional |
| Installierte Größe | 304 Byte |
| Hängt ab von | libc6 (>= 2.7-1), libusb-0.1-4 (>= 2:0.1.12) |
| Empfohlene Pakete | |
| Paketbetreuer | Riccardo Stagni |
| Quelle | |
| Paketgröße | 117996 Byte |
| Prüfsumme MD5 | 62cbf44343a98fad18a5ebf2c2e443f7 |
| Prüfsumme SHA1 | c47ae7aa1288109da9d9babbdaffa2722e63932f |
| Prüfsumme SHA256 | 17151561b0818d1518f3f4b3647f81e8c0a913606074698eed17007a2608de02 |
| Link zum Herunterladen | digitemp_3.5.0ds1-1_i386.deb |
| Ausführliche Beschreibung | Digitemp is a program that reads data coming from a 1-Wire network using
a passive adapter (DS9097) or the newer active adapter (DS9097U),
connected to a serial port. It also supports reading from USB adaptors
like the DS2490. Basically it reads temperature sensors, but others
are supported, like a humidity sensor.
.
Digitemp also supports branched networks using DS2409 couplers.
|